BlogCare guide · Ceramic coating
Ceramic Coating Care Through a BC Winter: How to Wash a Coated Car in Surrey
A practical winter care guide for ceramic-coated cars in Surrey, White Rock and Langley: how to wash off salt brine and road film safely, what to avoid, how to care for coated PPF, glass and wheels, and when to have us take a look.
· 6 min read · Triple Black Auto Lab
From November to March, a car in the Lower Mainland is wet more often than it is dry. The roads collect sand and grit, the salt trucks come out on cold nights, and the spray off the car in front of you leaves a grey film on every lower panel. If your car has a ceramic coating, this is the season where it earns its keep. It is also the season where how you wash the car matters most.
This is the care guide we would give you at the shop at 4-15515 24 Ave in South Surrey. It is not complicated, and none of it needs special gear beyond a couple of buckets, good mitts and clean towels.
What a ceramic coating does (and does not do) in winter
A ceramic coating bonds to the surface and leaves a hard, slick, water-repellent layer. In a wet winter that means water beads and sheets off, and salt residue, road film and brake dust let go more easily when you rinse and wash. Less scrubbing means fewer chances to drag grit across the finish.
What it does not do is keep the car clean on its own. Grime still lands on a coated car. And a coating will not stop rock chips from winter sand and gravel. That is the job of paint protection film. Our guide to winter road salt and rock chips in BC covers that side of things.
Think of the coating as something that makes good washing easier, not something that replaces it.
How often to wash a coated car in winter
There is no magic number, because it depends on where and how you drive. A car doing a daily commute on Highway 99 or Highway 1 picks up a lot more than one that mostly sits in a garage in White Rock.
Our rule of thumb is simple: do not let salty road film sit for weeks. After a stretch of driving on treated roads, give the car at least a rinse, and wash it properly when you can. A coated car is quick to wash, so it is easier to keep up with than an uncoated one.
A safe winter wash, step by step
This is the routine we would recommend for a coated car. It works the same whether the coating is on paint, on PPF, or both.
1. Rinse first, and rinse well
Most scratches from washing come from grit being rubbed into the paint. Start with a thorough rinse from the top down to float off as much sand and salty grime as you can before anything touches the car. Spend extra time on the lower doors, rockers and behind the wheels, where the spray builds up. If you use a pressure washer, keep the nozzle a sensible distance from the paint and from film edges.
2. Use a gentle car shampoo
A pH-neutral car shampoo is a safe default for coated paint. Avoid dish soap, strong degreasers or harsh all-purpose cleaners on the paint unless your aftercare instructions say otherwise. You do not need anything aggressive. The point of the coating is that the dirt releases easily.
3. Two buckets and a clean mitt
Use one bucket for soapy water and one for rinsing the mitt, so the grit you pick up goes into the rinse bucket instead of back onto the paint. Wash from the top down, and leave the dirtiest lower panels for last. If you drop the mitt on the ground, swap it for a clean one.
4. Do the wheels separately
Wheels collect the worst of the winter brake dust and road grime. Use a separate mitt or brush for them so that grit never ends up on the paint. If your wheels are coated, most of it should come off with a rinse and a gentle wash.
5. Dry it, do not let it air-dry
A coating helps water run off, but drops that dry on the surface can still leave spots. Dry the car with a clean, soft microfibre towel, or blow it off with air if you have a blower. Wipe the door jambs too, so water does not run out later and streak the paint.
What to avoid on a coated car
- Brush and soft-cloth car washes. The brushes can carry grit from car to car, and they are a common cause of swirl marks on any finish.
- Scrubbing a dry, dirty car. Wiping salty dust off with a towel is like using fine sandpaper. Rinse first, every time.
- Letting grime sit. Salt residue and road film are easier to remove when they are fresh.
- Washing in freezing conditions. If water is freezing on the car, wait for a milder day or use a touchless wash as a stopgap, and dry door seals and locks so they do not freeze shut.
Coated PPF, glass and wheels
PPF with a coating on top. If you have film on the front, wash it the same way as the rest of the car. Be gentle around film edges, and do not aim a pressure washer straight at an edge. Our Full Front package includes a 2-year full-vehicle ceramic coating that goes over the film as well as the paint.
Glass. A coating on the windows helps water bead and makes road film easier to clean off, which is useful on dark, wet winter commutes. Keep your wiper blades in good shape, and clean the glass with a product that is safe for coated glass.
Wheels. Coated wheels are noticeably easier to rinse clean in winter. Still avoid strong acidic wheel cleaners unless your aftercare instructions allow them.
Signs your coating needs a look
In winter, the most common reason a coated car seems to stop beading water is not the coating at all. It is a film of road grime sitting on top of it. A proper wash often brings the beading back.
If the car still looks flat after a good wash, if water sits on the paint instead of running off, or if you see swirls or light scratches building up, send us a photo. We will take a look and tell you honestly what it needs, whether that is a decontamination wash, paint correction, or nothing at all.
Getting a car coated before the worst of winter
If your car is not coated yet, it is not too late. The coating goes on a properly cleaned and prepped car inside the shop, so the weather does not set the schedule. Most paint has some wash swirls, and a coating locks in whatever is underneath, so we usually look at paint correction first.
If you are also thinking about chips, our Full Front package is the one we publish a price for: $1,797, regularly $2,197. It covers the full hood, full fenders, front bumper, headlights, fog lights and mirror caps in STEK DYNOshield Platinum, which is backed by STEK's 10-year warranty, plus a 2-year full-vehicle ceramic coating with window and wheel coating included. Coating on its own and every other package is by quote, because the car, the paint condition and what you want covered all change the job. Not sure which you need? Read PPF vs ceramic coating in BC, or our guide to how much PPF costs in Surrey. Driving a Tesla? See our Tesla PPF guide.
Get a quote for ceramic coating
The fastest way to get a number is the free quote form. Send the year, make and model, the colour, the condition of the paint, and how you use the car. A daily highway commute, a weekend car, a brand-new vehicle: that context helps us quote the right job. You can also find more answers on our FAQ page.
Or call or text 604-372-3788. Triple Black Auto Lab works by appointment only, at 4-15515 24 Ave in South Surrey, close to White Rock and an easy drive from Langley. We will come back with a written quote for your car.
FAQ
Quick answers.
Do I still need to wash my car in winter if it has a ceramic coating?
Yes. A coating makes road film, salt residue and brake dust release more easily, but it does not stop them landing on the car. Rinsing and washing regularly through the winter is what keeps the finish looking good, and a coating makes each wash quicker and gentler.
Can I take a ceramic-coated car through an automatic car wash?
We recommend against brush or soft-cloth washes, because the brushes can drag grit across the paint and leave swirl marks, coated or not. A touchless wash is a reasonable fallback when you cannot hand wash, and it is better than letting salty grime sit for weeks. Follow the aftercare instructions we give you for your coating.
Why has my coated car stopped beading water?
In winter, the most common reason is a layer of road film sitting on top of the coating. A proper wash often brings the beading back. If the car still looks flat or water sits on the paint after a good wash, call or text us and we will take a look and tell you honestly what it needs.
Can I put ceramic coating on a car before winter?
Yes. The coating goes on a properly cleaned and prepped car inside the shop, so the rain outside does not set the schedule. Most paint benefits from correction first, because the coating locks in whatever is underneath. We will look at your paint and quote it for your car.
Is ceramic coating included with PPF?
With our Full Front package, yes. It is $1,797 (regularly $2,197) and covers the full hood, full fenders, front bumper, headlights, fog lights and mirror caps in STEK DYNOshield Platinum, plus a 2-year full-vehicle ceramic coating with window and wheel coating included. Coating on its own, and every other package, is quoted for your vehicle.
